PrintItNow · Printer Drivers & Setup

Select Your Printer Model

Choose your brand to open the official driver portal and get the correct software for your device.

Download Your Printer Drivers
HP Brother Epson Canon Other
Download Printer Drivers

Tip: Use the exact model printed on the device label for the best match.

Printer Setup Instructions

Follow these steps after downloading the correct driver package for your operating system.

Unbox & power on

Remove packing materials, install ink or toner, load paper, and connect power. Wait until the ready light is steady.

Connect the device

Use USB for first-time installs, or connect to Wi‑Fi / Ethernet once the setup wizard prompts for network settings.

Install the driver

Run the official installer, accept permissions, and select your connection type. Restart if the installer requests it.

Print a test page

Confirm the printer appears in system settings, set it as default if needed, then print a test page to verify output.

Featured guide

Wireless printer setup checklist

Most connection issues come from network mismatch or incomplete driver installs. Work through this list before retrying.

  • Place the printer within strong Wi‑Fi range of your router during setup.
  • Use the same 2.4 GHz or 5 GHz band your computer is currently on.
  • Temporarily disable VPN software while pairing the printer.
  • Update firmware from the manufacturer portal after the first successful print.

Quick wireless sequence

  1. Open the printer’s wireless setup menu on the control panel.
  2. Select your network SSID and enter the password carefully.
  3. On your PC or Mac, add the printer from system settings.
  4. If discovery fails, reconnect with a USB cable and finish Wi‑Fi from the driver utility.

Choose your operating system

Driver packages differ by platform — pick yours for tailored install notes.

Common driver questions

Short answers to the issues people hit most often during install.

Do I need a driver if my OS already detected the printer?
Basic printing may work with a generic driver, but the manufacturer package unlocks scanning, ink levels, wireless utilities, and firmware tools.
What if the installer says my model is not supported?
Double-check the model string, then confirm you selected the correct OS version. Older models may need a legacy package listed under “previous versions” on the brand site.
USB works but Wi‑Fi does not — what next?
Keep the USB cable connected, open the brand’s wireless setup utility, and push network credentials from the computer. Then remove USB and reprint wirelessly.
Should I remove old printer software first?
Yes, when upgrading or switching models. Uninstall previous suites from Apps & Features (Windows) or move the old utility to Trash (macOS), then reboot before installing.